PE Jaw Crusher

Based on more than 30 years experience and technology development, SBM is going more rapid and stable on the road of mining machinery production. PE jaw crusher was the star product at the beginning of our SBM company, but also an important products to promote the development of our SBM company.SBM’s PE series jaw crushers are used as primary crusher and secondary crusher, since they can achieve coarsely crushing and fine crushing.
Our PE series jaw crusher can process large stones with large capacity primarily and thus become the first choice for primary crushing. We also have other crusher that match it better and can be used as secondary crusher after the primary crushing. The PE series jaw crusher have complete specifications and the feeding size ranging from 125mm to 1020mm. The maximum capacity can reach 800 tons per hour. We have 9 diffierent model for you to choose from.

Application of of PE Jaw Crusher

SBM PE Jaw crusher is mainly used for crushing various ores and large materials with compression strength not more than 320Mpa into medium-sized grains.Especially for some hard rock like granite, marble, limestone, quartz stone, river pebbles, iron ore, copper ore,the breaking effect is very good.Now,the PE jaw crusher is widely applied in mine,metallurgy,construction,road,railway,water conservancy,chemical industry,refractory material and ceramic etc.

Distinctive feature of PE Jaw Crusher

  1. Adopt advanced manufacturing technique and high-end materials.
  2. Simple structure, easy maintenance,stable performance,less dust and more environmental.
  3. Flexible discharge opening setting of jaw crusher allows perfect match with relative equipments.
  4. Crushing cavity is deep and there is no dead area,which improves feeding capacity and output.
  5. High reduction ratio and high crushing ratio.The final particles is uniform.
  6. Spacing piece type discharge-hole adjustment device is reliable and convenient.
  7. Reliable and safe lubrication system, convenient replacement of parts and small work load of maintenance.
  8. Important parts is made up of high manganese steel,which is very wear-resisting and extend the service life of the machine.

Working principle of PE Jaw Crusher

The main parts of SBM PE jaw crusher is frame, flywheel, movable plate, fixed plate, toggle plate, set adjustment, main bearing etc.The toggle plate is used for protection. Through belt the motor of jaw crusher transmits power, and drives the movable jaw doing periodic motion towards the fixed jaw via the eccentric shaft by a regulated track. when the moving jaw moves towards the fixed jaw, the materials in the crushing cavity will be crushed and discharged through the discharging opening.

Technical data of PE Jaw Crusher

Model Feed Opening (mm) Max Feeding (mm) Discharge Opening (mm) Capacity (t/h) REV (r/min) Power (kw) Motor Model Machine Size (mm)
PE200×350 200×350 170 20-50 2-6 220 6-7.5 Y160M-6/7.5
PE250×400 250×400 210 20-60 5-20 310 6-15 Y180L-6/15 1450×1315×1296
PE250×750 250×750 210 20-60 8-22 320 6-30 Y225M-6/30
PE500×750 500×750 425 50-100 45-100 275 6-55 Y280M-6/55 1890×1916×1870
PE600×900 600×900 500 65-160 70-120 250 6-75 Y315S-6/75 2520×1840×2303
PE750×1060 750×1060 630 80-140 130-260 250 8-90 Y315L1-8/90 2620×2302×3110
PE900×1200 900×1200 750 95-165 220-380 200 8-130 JR127-8/130 3789×2826×3025
PE1000×1200 1000×1200 850 195-265 230-380 200 8-130 JR127-8/130 3889×2826×3025
PE1200×1500 1200×1500 1020 150-300 400-800 220 8-200 YR355M4-8/200 4930×3150×3700